Email this article 
Hide
Show all
Strategi Operasi Berbasis Lean Six Sigma sebagai Usaha Peningkatan Service Level
Abstract
The development of the automotive industry in Indonesia made the level of competition even tighter, so Auto2000 Setiabudhi tried to provide periodic maintenance services, especially for the replacement of New Avanza Veloz disc brakes. The purpose of this study was to reduce the processing time of the New Avanza Veloz disc brake replacement to increase the Auto2000 Setiabudhi service level. However, the results of observations found that the time for disc brake replacement was exceeded the requirements set by the company. The observation was carried out for two years, from 2017 to 2018. Obtained also information from observations that there was an increase in the processing time gap of 0.84%, an increase in service level gap of 5.17%, while waste that occurred was waste waiting and motion. The method used in this study is based on Lean Six Sigma. The results obtained after improvements were made to a reduction in processing time by 50%, reduction in waste waiting, and motion and the achievement of service levels by 100%.
Keywords
Full Text:
PDFReferences
Daft, R. L. (2016). Organization Theory & Design. Boston: MA Cengage Learning.
Dewi, W., R., Setyanto, N., W., dan Tantrika, C., F., M. (2013). Implementasi Metode Lean Six Sigma Sebagai Upaya Meminimasi Waste pada PT. Prime Line International. Jurnal Rekayasa dan Manajemen Sistem Industri, 1(1), 47–56. Diakses dari http://jrmsi.studentjournal.ub.ac.id/index.php/jrmsi/article/view/12/24
Fransiscus, H., Juwono, C., P., dan Astari, I., S. (2014). Implementasi Metode Six Sigma DMAIC untuk Mengurangi Paint Bucket Cacat di PT. X. Jurnal Rekayasa Sistem Industri, 3(2), 53-64. doi: https://doi.org/10/26593/jrsi.v3i2.1297.53-64
Gasperz, V. (2007). Team-Oriented Problem Solving Paduan Kreatif Solusi Masalah untuk Sukses. Jakarta: PT. Gramedia Pustaka Utama.
Gasperz, V., & Fontana, A. (2011). Lean Six Sigma for Manufacturing and Services. Bogor: Vinchirsto Publication.
Heizer, J., & Render, B. (2015). Manajemen Operasi: Manajemen Keberlangsungan dan Rantai Pasokan, edisi 11. Jakarta: Salemba Empat.
Irawan, S. V. (2014). Pendekatan Metode Six Sigma (DMAIC) dan proses Audit (CPPP) untuk Peningkatan Kualitas di PT. IGP. Jurnal Penelitian dan Aplikasi Sistem dan Teknik Industri, 8(3), 411–422. Diakses dari https://www.neliti.com/publications/182902/pendekatan-metode-six-sixma-dmaic-dan-proses-audit-cppp-untuk-peningkatan-kualit#cite
Hartanto, A. (10 November 2017). Menperin Apresiasi Perkembangan Industri Otomotif Indonesia. Diakses dari https://kemenperin.go.id/artikel/17959/Menperin-Apresiasi-Perkembangan-Industri-Otomotif-Indonesia
__________. (10 November 2018). Sektor Otomotif Berpeluang Melaju. Diakses dari https://www.gaikindo.or.id/2018-sektor-otomotif-berpeluang-melaju/
Kiran, D. R. (2016). Total Quality Management: Key Concepts and Case Studies. Butterworth-Heinemann: Elsevier.
Kreitner, R., dan Kinicki, A. (2014). Perilaku Organisasi. Jakarta: Salemba Empat.
Lubis, M. Y. (2016). Analisis Penerapan Lean Six Sigma pada Proses Produksi Part Body Casing Meter Air di PT. MRN. Tesis. Universitas Pasundan.
Maulana, A. (22 Desember 2017). Keuntungan Servis Berkala Mobil di Bengkel Resmi. Diakses dari https://amp.kompas.com/otomotif/read/2017/12/22/154200615/keuntungan-servis-berkala-mobil-di-bengkel-resmi
Muchlas, M. (2012). Perilaku Organisasi. Yogyakarta: Gadjah Mada University Press.
Nasution, M. N. (2010). Manajemen Mutu Terpadu (Total Quality Management) Edisi 3. Jakarta: Ghalia Indonesia.
Nurprihatin, F., Yuliata, N. E. dan Caesaron, D. (2017). Usulan Pengurangan Pemborosan pada Proses Penjahitan Menggunakan Metode Lean Six Sigma, Bandung: Seminar Nasional Akuntansi dan Bisnis (SNAB) Program Studi Akuntansi dan Bisnis, Manajemen Universitas Widyatama, 809-818. Diakses dari https://repository.widyatama.ac.id/xmlui/handle/123456789/8580
Robbins, S. P., dan Coulier, M. (2016). Management 13th edition. Boston: Pearson.
Robbins, S. P., dan Judge, t. A. (2015). Perilaku Organisasi Edisi 16. Jakarta: Salemba Empat.
Russel, R. S. (2013). Operation Management: Creating Value Along the Supply Chain. Hoboken: Wiley.
Schermerhorn, J. R., Davidson, P., Factor, A., Poole, D., Woods, P., Simon, A., McBarron, E. (2016). Management 6th Asia – Pacific edition. Milton: QLD John Wiley & Sons Australia.
Shafritz, J. M., Ott, J. S., Jang, Y. S. (2016). Classic of Organization Theory eight edition. Boston: MA Cengage Learning.
Slack, N., Joner, A. B., Johnston, R. (2016). Operation Management 8th edition. Harlow: Pearson Education Limited.
Sutisna, S. (2008). Perilaku Konsumen dan Komunikasi Pemasaran Pengantar. Bandung: PT. Remaja Rosdakarya.
Syahroni, F. R. (2015). Mereduksi Waste berdasarkan Produksi Susu Pasteurisasi dengan Pendekatan Lean Suix Sigma Studi Kasus : KUD Nadhi Murni. Skripsi. Institut Teknologi Sepuluh November.
Waldman, D. E., dan Jensen, E. J. (2016). Industrial Organization Theory and Practice, fourth edition. London: Routledge.
DOI: https://doi.org/10.35138/organum.v2i1.59
Refbacks
- There are currently no refbacks.
